Easy Cleaning, No Worries! Stain-Resistant Tips for Plastic Floors

Vinyl flooring has the characteristics of being wear-resistant, slip-resistant and easy to clean, and is widely used in homes, offices, schools and other places. Here is the detailed content about the cleaning and maintenance of Vinyl flooring:

Ⅰ. Daily cleaning methods

1. Dust removal

• Dry mopping or vacuuming: Daily use a soft dry mop or vacuum cleaner to remove surface dust and debris. Avoid sanding the floor surface with sand particles, which may cause scratches.
• Pay attention to corners: Areas prone to dust accumulation such as corners and under furniture can be gently cleaned with a soft-bristled brush.

2. Stain cleaning

• Common stains: Use a slightly damp soft cloth (or a wrung-out mop) to wipe. For example, tea stains, coffee stains. After wiping, promptly dry the water with a dry cloth.
• Hard stains:

①Oil stains, wax stains: Mix neutral detergent (such as dish soap) with water in a dilution ratio, then use a soft cloth to gently wipe, and then wipe clean                  with water.

② Ink, paint: Immediately apply alcohol or a dedicated floor cleaner to the stain, let it stand for a moment before wiping, avoid rubbing forcefully.

③Chewing gum: First apply ice to cool it until it becomes hard, then gently scrape off, and finally wipe the remaining traces with a cleaning agent.

3. Cleaning tool selection

• Avoid using steel wool, hard-bristled brushes, etc., as they may scratch the floor surface.
• The mop should be made of ultra-fine fiber or cotton material, and avoid using mops with loose fibers.

Ⅱ.Key points for regular maintenance

1. Deep cleaning

• Frequency: Conduct a deep cleaning once every 1-2 months.
• Method:

①Spray a neutral floor cleaner (mixed with water according to the instructions) evenly on the floor.

②Gently wipe with a soft mop or cleaning machine, focusing on cleaning crevices and easily dirty areas.

③Wipe with water 2-3 times to ensure that the cleaning agent residue is completely removed.

④Finally, use a dry mop or water suction machine to dry the water, keeping the floor dry.

2. Waxing maintenance

• Applicable scenarios: Public areas with high foot traffic (such as shopping malls, offices) can be regularly waxed, while for home use, it can be chosen based on needs.
• Steps:

①Thoroughly clean the floor and let it dry.

②Apply the special floor wax evenly on the surface. You can operate it with a waxing machine.

③After the wax is completely dry (usually 1-2 hours), use a clean soft cloth to polish it to enhance the shine and wear resistance.

• Note: Avoid using inferior wax water, which may cause the floor to turn yellow or become sticky; the frequency of waxing should not be too high, once every 3-6 months is sufficient.

III. Special Scene Handling

1. Moisture-proof and Waterproof

• Although the plastic floor has a certain waterproof property, prolonged soaking can damage the base layer. In case of water stains (such as water leakage from the water pipe), immediately use an absorption machine or a dry mop to clean, and open the windows for ventilation to prevent the floor from warping or getting moldy.
• In damp areas such as bathrooms and kitchens, it is recommended to lay anti-slip mats to reduce direct contact of water with the floor.

2. Scratch-resistant and Wear-resistant

• Add rubber protection covers to the furniture feet and table legs to avoid scratching the floor when moving.
• When carrying heavy objects, lift them off the ground and move them, do not drag; you can lay hard cardboard or protective pads on the floor to reduce friction.

3. Sun Protection

• Long-term exposure to sunlight may cause the floor to fade or age. It is recommended to install curtains or blinds to avoid direct exposure to strong light.

Ⅳ.Prohibited Items

• Do not use strong corrosive cleaners: such as bleach, concentrated acid / alkali solutions, which will damage the surface coating of the floor.
• Avoid direct contact with high temperatures: do not place hot pots, irons, etc. directly on the floor, which may cause deformation or discoloration.
• Do not use a wet mop for a long time:A damp environment is likely to cause the edges of the floor to curl up. After cleaning, it should be dried promptly.

Ⅴ.Techniques for Extending Lifespan

• Regular inspection：Check whether the joints of the floor are loose and whether there are any damages on the surface. Repair small problems in time to avoid the expansion of damage.
• Control indoor humidity：Keep the humidity between 40%-60%，when the humidity is too low，you can use a humidifier to prevent the floor from cracking.
• Use separate areas：Place anti-slip mats at the doorways to reduce the entry of mud and sand； in high-traffic areas， you can regularly change the placement of items to avoid excessive wear in certain areas.

 

By performing proper cleaning and maintenance, the Vinyl flooring can maintain its appearance and durability, and extend its service life. In case of complex problems (such as large-scale damage or special stains), you can contact professional floor maintenance personnel for handling.